XK-150 Power Units

XK-150 power units use a variable displacement piston-type hydraulic pump to allow any swivel speed desired. Caterpillar engines are standard.

Hydraulic-powered triple hose reel is standard with 100 foot hydraulic hoses, and reel will accept 200 feet if required. Our design use standard swivel joints for high pressure axle bearings, available economically anywhere in the world. For operator safety, our hydraulic control valve is located well away from the reel. We proudly call the reel drive our ugly gear drive, so named because the slow moving open gears are flame cut.

 

Trailer Power Units

Our trailer power units are designed with the highest degree of roadworthiness. We use the widest tandem axles with oversize weight ratings. Electric brakes are fitted on both axles, and the standard breakaway system locks the brakes should the trailer separate from the truck. For best road balance, all equipment is arranged on the trailer centerline. Rugged fender tanks are arranged on each side for best balance and to maximize service access on the trailer deck.   Gooseneck or bumper hitches are optional, and spare tire is included.

XK150-Blue-Gooseneck
Red Gooseneck Trailer
Orange Gooseneck Trailer
Green_Trailer

 

Skid Power Units

Rugged oilfield skids are designed for truck winching and are fully floored with diamond plate. Oil spill containment rail is fully welded all around. Heavy-duty dual tank design uses minimum floor space, and all equipment is arranged to allow easiest access for service. Heavy bumpers are standard on both ends. Offshore skids are built with overhead crane lifting frames, seal welding throughout, and special salt air paint systems.

MonsterTruckXK150
You can even have it in University of Texas Orange

 

Helicopter-transportable dual-skid units are available if required.

Helicopter - transportable double skid built for 8800 lbs/per lift maximum. Shipped to Papua New Guinea.

 

Air remote controls

The power unit includes air remote controls and a 50-foot control hose umbilical which feature stainless liquid-filled torque gauge, dual lever controls are fitted for direction/speed and engine throttle. Pushbutton controls are fitted for engine kill (fuel shutoff), emergency engine kill (air shutoff), plus fool-proof torsional release control to allow controllable unwind of the drill string before picking up. Emergency engine kill may also be manually operated at the engine.

control panel

 

 

 

 

Torque Box A control for setting maximum torque is mounted on each unit near the pump. Torque setting instructions are permanently marked on front panel of the box.

.

XL 150 Torque Box

Learn About Venturetech

larry

1980 - Larry Keast started Venturetech in his garage to design and manufacture new ventures in technical equipment. Larry's bio. Within two years, he decided that power swivels were an…

Learn about Power Swivels

swivel

by Larry Keast, P.E., Founder & CEO Venturetech Corporation International    This brief history is written from my experience since 1980, from researching Gulf Publishing's…

News and Events

Welcome! We are excited for the opportunity to serve you. Look back here for information on our company, events, products, and success.